Objective:
- Set up network using wireless
router
- Check connectivity
Content / Procedure:
- Plug in cable cat 5e from server
to LAN port 1 at router
- Set IP address 192.168.1.1 for
server
- Ping server IP from client Laptop
to check conectivity
Result and Analysis:
Server will show 100 mbps
when get LAN connectivity. After identify connectivity, set IP
address 192.168.1.1 manually for server in network connection then go
to internet protocol properties(TCP/IP) . Set subnet mask 255.255.255.0
then finish the process. To check weather connectivity can be establish or
not, from client laptop attach cat 5 to LAN port 2 at router . Client
laptop, open the command prompt then ping server IP 192.168.1.1. If client
can ping server IP the result should get reply from 192.168.1.1 :bytes 32
times<1ms TTL=128 and Ping statistic for 192.168.1.1 packects : sent=4
receive =4 loss=0 from. From the result, verification the connection establish
able to make.
Conclusions:
Checking data packet from
client to server shown the connectivity of server in the network that created.
Figure1: LAN properties
Figure 2: TCP/IP
No comments:
Post a Comment